Independent guide. Not affiliated with, endorsed by, or sponsored by Cricut. Cricut is named only to describe machines and materials.

Settings

Machine and material, one pair at a time

Machine and material pairs: the Design Space preset, blade, published cut pressure, multi-cut, mat, and whether to mirror.

Cricut Joy

Cricut Joy glitter iron-on settings

On a Cricut Joy, Smart Iron-On glitter is preset “Smart Iron-On - Glitter,” cut pressure 147, multi-cut Off, Cricut Joy Fine-Point blade, no mat, mirrored. Sheet Glitter Iron-On is pressure 180, multi-cut Off, on a StandardGrip mat, also mirrored. Leave pressure on Default and test a scrap.

Cricut Joy

Cricut Joy permanent vinyl settings

For Smart Vinyl permanent on a Cricut Joy, choose “Smart Vinyl - Permanent,” cut pressure 125, multi-cut Off, Cricut Joy Fine-Point blade, no mat, and do not mirror. Joy’s sheet row is named “Premium Vinyl,” pressure 139, not “Permanent Glossy.”

Cricut Explore 3

Cricut Explore 3 chipboard settings

Explore 3 can use the published preset Light Chipboard 0.37 mm, at cut pressure 327, multi-cut 2x, Fine-Point Blade, on a StrongGrip mat, with no mirror. Chipboard at 1.5 mm and 2.0 mm is not on the Explore 3 list. Those rows need a Knife Blade on a Maker.

Cricut Explore 3

Cricut Explore 3 medium cardstock settings

For 80 lb (216 gsm) cardstock on Explore 3, choose “Medium Cardstock - 80 lb (216 gsm),” cut pressure 320, multi-cut Off, Fine-Point Blade, StandardGrip mat. For fine detail, the separate preset “Cardstock (for intricate cuts)” is pressure 200 and multi-cut 2x. Do not mirror.

Cricut Maker 3

Cricut Maker 3 basswood settings

On Maker 3, 1/16 inch (1.6 mm) basswood is cut pressure 750, multi-cut 14X, Knife Blade. The 1/32 inch row is pressure 381 and multi-cut 18X, also Knife Blade. No mirror. Explore 3 and Joy do not publish a basswood row.

Cricut Maker 3

Maker 3 laminated sticker paper, kiss cut

Maker 3 does not publish “Laminated Printable Sticker Paper.” That name, at pressure 250 and two passes, is on the Joy 2, Explore 5, and Maker 5 tabs. For Maker 3 white sticker paper, green liner is pressure 115 and gray liner is 265, multi-cut Off, fine-point blade. Choose Kiss Cut in the Sticker tool. Test a scrap.