Design Space preset
Smart Vinyl - Permanent
Cut pressure 125
- Blade
- Cricut Joy Fine-Point
- Multi-cut
- Off
- Pressure control
- Start on Default
Independent guide. Not affiliated with, endorsed by, or sponsored by Cricut. Cricut is named only to describe machines and materials.
Updated November 18, 2026
Smart Vinyl permanent on a Cricut Joy is pressure 125 with no mat. The sheet row named Premium Vinyl is 139. Do not mirror.
For Smart Vinyl permanent on a Cricut Joy, choose “Smart Vinyl - Permanent,” cut pressure 125, multi-cut Off, Cricut Joy Fine-Point blade, no mat, and do not mirror. Joy’s sheet row is named “Premium Vinyl,” pressure 139, not “Permanent Glossy.”
These rows are for Cricut Joy only. Leave pressure on Default, which is the published cut pressure. Mirror: no. Mat: Smart Vinyl permanent loads with no mat at 4 inches or longer. Sheet vinyl goes on a LightGrip or StandardGrip mat. Cricut lists vinyl on both.
Design Space preset
Cut pressure 125
Design Space preset
Cut pressure 139
Joy can cut permanent vinyl. It cannot cut a 12-inch decal in one pass. The continuous Smart shape is 4.5 inches wide.
Explore 3’s “Premium Vinyl - Permanent Glossy” at 115 is an Explore 3 row. It is not the Joy setting.
Joy fine-point blade. Do not mirror. For a mat, Cricut lists vinyl on LightGrip and again on StandardGrip. Use the mat the screen asks for. Smart vinyl that is too short for the rollers goes on a StandardGrip mat. Cricut’s Smart Vinyl page says that.
Weed on the liner. Ordinary transfer tape is what Cricut describes for most vinyl. StrongGrip transfer tape is for shimmer and glitter, and Cricut says it is too strong for other vinyl. Burnish, then peel the tape back on itself.
A kiss that does not release the letters means try More after a test, or a new Joy blade. A cut that slices the liner means Less. Multi-cut stays Off. Both rows say Off.
See also the Cricut Joy page and the material page.
If the roll is Smart Vinyl permanent, the Joy preset is Smart Vinyl - Permanent at cut pressure 125, multi-cut Off. If you have a sheet and Joy only shows “Premium Vinyl,” that published row is 139. Joy does not publish a separate Permanent Glossy line.
No. Cricut’s Smart Vinyl steps never tell you to mirror. You weed the vinyl on its liner and move it with transfer tape. Mirror is for iron-on.
Cut a small scrap on Default first. If the blade is dragging or ripping the film, choose Less, and check that you are not on an iron-on preset. Glitter vinyl wants StrongGrip transfer tape. Smooth permanent vinyl does not.