Independent guide. Not affiliated with, endorsed by, or sponsored by Cricut. Cricut is named only to describe machines and materials.

Updated November 18, 2026

Cricut Explore 3 medium cardstock settings

Explore 3’s 80 lb cardstock preset is pressure 320, one pass, fine-point blade. Intricate cuts are a second preset at 200 with two passes.

For 80 lb (216 gsm) cardstock on Explore 3, choose “Medium Cardstock - 80 lb (216 gsm),” cut pressure 320, multi-cut Off, Fine-Point Blade, StandardGrip mat. For fine detail, the separate preset “Cardstock (for intricate cuts)” is pressure 200 and multi-cut 2x. Do not mirror.

Published presets

These rows are for Cricut Explore 3 only. Leave pressure on Default, which is the published cut pressure. Mirror: no. Mat: StandardGrip for cardstock. LightGrip is for thin cardstock. Glitter cardstock uses StrongGrip and a different preset.

Design Space preset

Medium Cardstock - 80 lb (216 gsm)

Cut pressure 320

Blade
Fine-Point Blade
Multi-cut
Off
Pressure control
Start on Default
Less Default · 320 More

Default is this published cut pressure. More and Less are the on-screen adjustments if a test cut is off. For a fine-point blade, Custom Materials can also edit the number. The number is Cricut’s Cut Pressure column. It is not pounds or PSI. Copied November 18, 2026 from Cricut’s material list.

Design Space preset

Cardstock (for intricate cuts)

Cut pressure 200

Blade
Fine-Point Blade
Multi-cut
2x
Pressure control
Start on Default
Less Default · 200 More

Default is this published cut pressure. More and Less are the on-screen adjustments if a test cut is off. For a fine-point blade, Custom Materials can also edit the number. The number is Cricut’s Cut Pressure column. It is not pounds or PSI. Copied November 18, 2026 from Cricut’s material list.

Test cut. Cut a small shape on a scrap of the same material before the real project. Cricut says results vary. If the scrap does not cut through, try More, or the next heavier preset that this machine actually publishes. If the blade cuts the mat, try Less. Do not copy a pressure from a different machine.

Confirm the weight on the pack. 65 lb, 80 lb, and 100 lb are different presets. This page is the 80 lb (216 gsm) row, plus the intricate preset that sits next to it on the Explore 3 tab.

Everyday 80 lb cuts

Search Medium Cardstock - 80 lb. Pressure 320. Multi-cut Off. Fine-point blade. StandardGrip mat. No mirror. Explore 3 has no Smart Set dial. You pick this in Design Space. On an Air 2 you would turn the dial to Custom before the same kind of search, and that machine’s number is 299, not 320.

Intricate cuts

Search Cardstock (for intricate cuts) when letters or lace will tear on the single heavy pass. Pressure 200. Multi-cut 2x. Same fine-point blade. Cricut does not print “80 lb” on this name. If your paper is 100 lb, look at the heavy cardstock row instead of assuming the intricate setting covers it.

Weed and use

Paper does not weed like vinyl. Bend the mat, peel the sheet back, and use a spatula under delicate centers. A LightGrip mat can be too weak for 80 lb and let the sheet shift. A brand-new StandardGrip can be sticky enough to pill the back of the paper. Cricut does not publish a “season the mat” pressure. If fibers tear off, the official pressure move is Less, after a test.

If the cut is wrong

Not through: More, once, on a scrap. Cutting the mat: Less. Ragged edges on a simple shape: new fine-point blade before you change the number. Explore 3 will not fix a bad cut by switching to a Knife Blade. That tool is not available.

See also the Cricut Explore 3 page and the material page.

Sources

Official rows were checked on November 18, 2026. Cricut can change a preset after that date. Open the article before a project you cannot spare.

Questions