Updated November 18, 2026
Cricut Maker 3
Maker 3 cut size, Smart Materials, and the tools its material list actually names, including the Knife Blade for basswood and thick chipboard.
Affiliate links. Shop links on this page are marked for sponsors. If you buy through one, we may earn a commission. You do not pay extra. Disclosure.
Size, mat, and Smart Materials
| Machine size | Height 5.93 in (15.06 cm), length 21.18 in (53.80 cm), depth 6.99 in (17.75 cm) |
|---|---|
| Weight | 10.68 lb (4.84 kg) |
| Max material width | 13 in (33 cm) of Smart Materials, or 12 in (30.5 cm) on a mat |
| Smart Vinyl cut | 11.7 in × 12 ft (29.7 cm × 3.6 m) |
| Smart Iron-On cut | 11.7 in × 4 ft (29.7 cm × 1.2 m) |
| On a 12 × 12 mat | 11.5 in × 11.5 in (29.2 cm × 29.2 cm) |
| On a 12 × 24 mat | 11.5 in × 23.5 in (29.2 cm × 59.6 cm) |
| Tools | Cricut’s comparison table says 13 tools for cutting, writing, scoring, and other effects |
| Thickness note on the material list | The Maker 3 and Maker 4 tab says to stay under 2.4 mm, and that rigidity and density also decide the cut |
| Smart Materials | Yes. Long enough pieces load without a mat. |
Blades and tools named for this machine
- Premium Fine-Point Blade and Housing. The blade Maker 3 ships with. Vinyl, iron-on, cardstock, and sticker presets on the Maker 3 tab name a fine-point blade.
- Deep-Point Blade. Fits Maker and Explore. The Maker 3 list uses it for materials such as magnet, cereal box, and some leather. Use it when the preset names it.
- Knife Blade and drive housing. Maker machines only. Cricut recommends it for balsa, basswood, chipboard, and similar thick materials. Move the star wheels aside. Cricut says Knife Blade projects are not for the iOS or Android apps, because the long cut needs the computer connection.
- Rotary Blade. Named on the Maker 3 list for fabric presets such as cotton and denim. It is not the blade for vinyl.
- Bonded-Fabric Blade. Named for some bonded fabrics on the Maker 3 list, including bonded denim in that tab.
- Engraving Tip. The Maker 3 quick start says some materials can be engraved and not cut. Those settings show up when the operation is Engrave. They are not cut pressures.
Maker 3 is the machine in this set that publishes Knife Blade rows for basswood and for chipboard at 1.5 mm and 2.0 mm. It also cuts the everyday materials, and it loads Smart Materials without a mat the way Explore 3 does.
Cricut says the quick start machine includes a Premium Fine-Point blade. The other tools are extra. The comparison table counts 13 tools. This page names only the tools that the blade guide or the Maker 3 material list actually describes. It does not invent the rest of the set.
Print Then Cut is listed for Maker 3 on white and colored materials. That matters for sticker paper. The original Joy’s published list does not include printable sticker paper.
Smart Iron-On on Maker 3 is shorter than Smart Vinyl: 4 feet for one image, not 12. Read the length row in the quick start before you plan a long shirt decal.
Shop link: Cricut’s machine comparison.
Design Space presets copied for this site
Cricut publishes the full preset list on the material settings article, in this machine’s tab. The rows below are the ones copied on November 18, 2026. A material missing from this short table may still have a row in the article.
| Preset | Cut pressure | Multi-cut | Blade |
|---|---|---|---|
| Glitter Iron-On | 167 | Off | Fine-Point Blade |
| Smart Iron-On – Glitter | 163 | Off | Fine-Point Blade |
| Smart Vinyl – Permanent | 120 | Off | Fine-Point Blade |
| Premium Vinyl - Permanent Glossy | 120 | Off | Fine-Point Blade |
| Medium Cardstock – 80 lb (216 gsm) | 320 | Off | Fine-Point Blade |
| Cardstock (for intricate cuts) | 200 | 2X | Fine-Point Blade |
| Printable Sticker Paper, White (Green Liner Printing) | 115 | Off | Fine-Point Blade |
| Printable Sticker Paper, White (Gray Liner Printing) | 265 | Off | Fine-Point Blade |
| Printable Waterproof Sticker Set - White | 170 | Off | Fine-Point Blade |
| Light Chipboard – 0.37mm | 285 | 2x | Fine-Point Blade |
| Chipboard (1.5 mm) | 500 | 12x | Knife Blade |
| Heavy Chipboard – 2.0mm | 650 | 24x | Knife Blade |
| Basswood - 1/16" (1.6 mm) | 750 | 14X | Knife Blade |
| Basswood - 1/32" (0.8 mm) | 381 | 18X | Knife Blade |
Setting pages
Sources
- Official Cricut Maker 3 Quick Start Guide
- Official All about Cricut Knife Blade
- Official All About Cricut Blades and Machine Tools
- Official Which materials can I cut with my Cricut smart cutting machine?
- Official All About Smart Materials
- Official Cricut machine comparison
Questions
-
Do Maker 3 and Maker 4 share cut settings?
On the day this page was checked, Cricut published one tab titled “Cricut Maker 3 & Cricut Maker 4.” Use that tab for both until Cricut splits it. Do not use the separate Maker 5 tab. Its pressures are different.
-
Is the original Maker the same as Maker 3?
No. The original Maker has its own tab, and many pressures differ. It also does not load Smart Materials without a mat. A Maker 3 number is not an original Maker number.