Updated November 18, 2026
Cricut Joy cutting machine
Cut width, mats, Smart Materials, and the Joy blade for the original Cricut Joy, cited to Cricut’s quick start and material list.
Affiliate links. Shop links on this page are marked for sponsors. If you buy through one, we may earn a commission. You do not pay extra. Disclosure.
Size, mat, and Smart Materials
| Machine size | 5.50 in × 8.40 in × 4.25 in (13.9 cm × 21.4 cm × 10.8 cm) |
|---|---|
| Weight | 3.85 lb (1.75 kg) |
| Max cut on Smart Materials | One continuous shape 4.5 in × 4 ft, or repeated shapes 4.5 in × 20 ft |
| Max cut on a mat | 4.25 in × 6.25 in, or 4.25 in × 11.75 in on the longer mat |
| Shortest Smart Material without a mat | 4 in (10 cm). Shorter scraps go on a mat. |
| Smart Materials | Yes. Long enough pieces load without a mat. |
Blades and tools named for this machine
- Cricut Joy Blade and Housing. The blade in the box. Silver and white housing. Cricut’s material list calls the blade type “Cricut Joy Fine-Point.” Explore and Maker housings do not fit.
- Premium Fine-Point Cutting Tool. A one-piece tool Cricut also lists as compatible with Joy, Joy Xtra, and Joy 2. When it dulls, you replace the whole tool.
- Joy Foil Transfer Tool. For foil transfer sheets. It is a separate tool from the cutting blade, and it is not a cut-pressure setting.
- Joy pens and markers. Joy writes with its own pens. Cricut’s quick start says Explore and Maker pens do not fit the original Joy.
Joy is the small machine. The cut is narrow: 4.5 inches on Smart Materials, and about 4.25 by 6.25 inches on the short mat. Cricut’s quick start says it works with 50+ materials, including vinyl, iron-on, and cardstock. Chipboard at 1.5 mm and basswood are not on the published Joy list.
Smart Vinyl and Smart Iron-On load under the guides with no mat. Leave about 1 inch above the design and 0.5 inch below it so the rollers can hold the piece. Wait to trim until the cut is done.
On Explore Air 2 and older, a dial picks the material. Joy has no dial. You pick the material in Design Space after you connect the machine. Cricut marks its own materials in that list.
The comparison page on Cricut’s shop is a machine comparison. That is a shop link.
Design Space presets copied for this site
Cricut publishes the full preset list on the material settings article, in this machine’s tab. The rows below are the ones copied on November 18, 2026. A material missing from this short table may still have a row in the article.
| Preset | Cut pressure | Multi-cut | Blade |
|---|---|---|---|
| Glitter Iron-On | 180 | Off | Cricut Joy Fine-Point |
| Smart Iron-On - Glitter | 147 | Off | Cricut Joy Fine-Point |
| Smart Vinyl - Permanent | 125 | Off | Cricut Joy Fine-Point |
| Premium Vinyl | 139 | Off | Cricut Joy Fine-Point |
| Medium Cardstock - 80 lb (216 gsm) | 251 | Off | Cricut Joy Fine-Point |
Setting pages
Sources
Questions
-
Does the original Cricut Joy cut without a mat?
Yes, with Smart Materials. Cricut’s Joy quick start says a continuous shape can be up to 4.5 inches wide and 4 feet long, and repeated cuts up to 20 feet. The piece must be at least 4 inches long or it goes on a mat.
-
Can Joy use an Explore fine-point housing?
No. Cricut’s Joy quick start says Explore and Maker blade housings, mats, and pens do not fit Joy. Buy the Joy blade or the Premium Fine-Point Cutting Tool that Cricut lists for Joy.