Independent guide. Not affiliated with, endorsed by, or sponsored by Cricut. Cricut is named only to describe machines and materials.

Updated November 18, 2026

Glitter iron-on

Sheet glitter iron-on and Smart Iron-On glitter are different Design Space presets. Pressures are not the same on Joy, Explore 3, and Maker 3.

Affiliate links. Shop links on this page are marked for sponsors. If you buy through one, we may earn a commission. You do not pay extra. Disclosure.

Glitter iron-on is heat-transfer vinyl with a sparkle film. You cut it mirrored, weed the extra film off the liner, and press it onto fabric. Cricut’s specialty iron-on page is the how-to. The pressure numbers live on each machine’s tab of the material list, not on that how-to.

Two products get confused:

Joy’s published pressures are 180 for the sheet and 147 for Smart glitter. Explore 3 is 177 and 163. Maker 3 is 167 and 163. Those are not interchangeable. Multi-cut is Off on each of those rows.

Cricut’s household-iron note on the specialty page, if you do not own a heat press: cotton/linen, steam off, preheat the spot 10–15 seconds, medium pressure 25–30 seconds, then the same on the back, and peel when the liner is cool. A heat press should follow the Heat Guide instead of that iron shortcut. Glitter film is easy to under-press and easy to scorch, so the test scrap is a small letter, not the whole name.

Shop search, affiliate: glitter iron-on on Amazon. Match the preset to the brand you actually buy. “Heat Transfer (non-Cricut)” is its own row.

Published rows

Pressure is Cricut’s Cut Pressure number for that machine’s tab. “Not listed” means that tab had no row on the day we checked.

Preset Cricut JoyCricut Explore Air 2Cricut Explore 3Cricut MakerCricut Maker 3Cricut Venture
Glitter Iron-On 180 Off · Cricut Joy Fine-Point 260 Off · Fine-Point Blade 177 Off · Fine-Point Blade 205 Off · Fine-Point Blade 167 Off · Fine-Point Blade 180 Off · Performance Fine-Point
Smart Iron-On, glitter 147 Off · Cricut Joy Fine-Point Not listed 163 Off · Fine-Point Blade Not listed 163 Off · Fine-Point Blade 185 Off · Performance Fine-Point

Setting pages

Sources

Official rows were checked on November 18, 2026. Cricut can change a preset after that date. Open the article before a project you cannot spare.

Questions