Updated November 18, 2026
Chipboard sheets
Light 0.37 mm chipboard is a fine-point preset. Chipboard at 1.5 mm and 2.0 mm is a Knife Blade preset and is not on Explore 3 or Joy.
Affiliate links. Shop links on this page are marked for sponsors. If you buy through one, we may earn a commission. You do not pay extra. Disclosure.
Chipboard is pressed paperboard, thicker than cardstock. The thickness is the whole question. Cricut publishes three different names:
- Light Chipboard, 0.37 mm. Fine-point blade, two passes, on Explore Air 2, Explore 3, Maker, and Maker 3. Not on Joy’s tab.
- Chipboard (1.5 mm). Knife Blade, pressure 500, 12 passes, on the original Maker and on Maker 3. Not on Explore or Joy.
- Heavy Chipboard, 2.0 mm. Knife Blade, pressure 650, 24 passes, on Maker and Maker 3.
The blade guide also says a deep-point blade is recommended for chipboard in general. That sentence does not replace a preset. When the light-chipboard row says fine-point, use fine-point. When the 1.5 mm row says Knife Blade, a deep-point blade is the wrong tool, and Explore cannot run the Knife Blade at all.
Cereal box is its own preset (deep-point on several machines). It is not a nickname for 1.5 mm chipboard.
StrongGrip mat. Move star wheels aside for Knife Blade cuts, as the Knife Blade article says. Phone apps are not for Knife Blade projects.
Shop search, affiliate: chipboard sheets on Amazon. Measure the sheet. A pack that says “chipboard” without a thickness is not enough to pick the row.
Published rows
Pressure is Cricut’s Cut Pressure number for that machine’s tab. “Not listed” means that tab had no row on the day we checked.
| Preset | Cricut Joy | Cricut Explore Air 2 | Cricut Explore 3 | Cricut Maker | Cricut Maker 3 | Cricut Venture |
|---|---|---|---|---|---|---|
| Light chipboard, 0.37 mm | Not listed | 327 | 327 | 285 | 285 | Not listed |
| Chipboard, 1.5 mm | Not listed | Not listed | Not listed | 500 | 500 | Not listed |
| Heavy chipboard, 2.0 mm | Not listed | Not listed | Not listed | 650 | 650 | Not listed |
Setting pages
Sources
Questions
-
Can Explore 3 cut 1.5 mm chipboard?
The Explore 3 tab does not list Chipboard (1.5 mm) or Heavy Chipboard 2.0 mm. Those rows use a Knife Blade, and Cricut says that blade fits Maker machines only. Explore 3 does list Light Chipboard at 0.37 mm.
-
Which mat holds chipboard?
Cricut’s mat chart puts chipboard on the StrongGrip mat, with poster board, magnet, thick cardstock, and leather. LightGrip is for vinyl and thin paper, not for chipboard.