Updated November 18, 2026
Basswood sheets
Basswood at 1/16 in and 1/32 in is a Knife Blade material. Explore 3 and Joy do not publish a basswood row.
Affiliate links. Shop links on this page are marked for sponsors. If you buy through one, we may earn a commission. You do not pay extra. Disclosure.
Basswood is a thin wood sheet used for earrings, ornaments, and small signs. Cricut’s Knife Blade article lists 1/32 inch and 1/16 inch basswood among the materials that blade cuts. Balsa is a different wood and a different row. Do not swap them.
On the Maker 3 and Maker 4 tab:
- 1/16 in (1.6 mm): cut pressure 750, multi-cut 14X, Knife Blade
- 1/32 in (0.8 mm): cut pressure 381, multi-cut 18X, Knife Blade
The original Maker tab uses the same pressures and writes the pass counts as 14x and 18x. Explore 3, Explore Air 2, Joy, and Venture do not publish either row.
The cut is long. Cricut says Knife Blade projects are not compatible with the phone apps. Use Design Space on a computer. Slide the star wheels to the side so they do not track the wood. The mat chart does not name basswood. It does put other heavy sheets, including chipboard, on StrongGrip. Follow the mat prompt on screen, and expect the passes to take a while.
Maker 3’s material tab also says a test with a similar setting is only reasonable under 2.4 mm, and even then density matters. A thicker craft wood is outside these two rows.
Shop search, affiliate: 1/16 inch basswood on Amazon.
Published rows
Pressure is Cricut’s Cut Pressure number for that machine’s tab. “Not listed” means that tab had no row on the day we checked.
| Preset | Cricut Joy | Cricut Explore Air 2 | Cricut Explore 3 | Cricut Maker | Cricut Maker 3 | Cricut Venture |
|---|---|---|---|---|---|---|
| Basswood, 1/16 in (1.6 mm) | Not listed | Not listed | Not listed | 750 | 750 | Not listed |
| Basswood, 1/32 in (0.8 mm) | Not listed | Not listed | Not listed | 381 | 381 | Not listed |
Setting pages
Sources
Questions
-
Can an Explore machine cut basswood?
Not with a published preset. Basswood rows use the Knife Blade, and Cricut says that blade works with Maker machines only. Explore 3’s material tab has no basswood line. Do not reuse Maker’s pressure on an Explore.
-
What is the difference between 1/16 and 1/32 basswood?
They are different rows. On Maker 3, 1/16 in (1.6 mm) is cut pressure 750 and multi-cut 14X. The 1/32 in (0.8 mm) row is pressure 381 and multi-cut 18X. Thinner wood is not “less pressure and fewer passes” on this list.